Your Eyes in Factory

Inspection Services

Our Service Flow in Your
Purchasing Process

Pre-Production
Inspection

step 1Supplier Selectionstep 2Purchase Orderstep 3Productionstep 4Shipment
  • SFA=Simple Factory Audit
  • EFA=Extensive Factory Audit
  • SA=Social Audit
  • LT=Lab Testing
  • PPI=Pre-production Inspection
  • IPI=Initial Production Inspection
  • DPI=During Production Inspection
  • DSS=Defect Sorting Service
  • PM=Production Monitoring
  • PSI=Pre-shipment Inspection
  • CLS=Container Loading Supervision

Inspection Services

Quality inspections, also known as product inspections or product verification is a process to check the status and quality of your goods, during all steps of production in order to ensure that you will get what you ordered.

The quality inspection will help you to make sure that all your requirements, specifications and criteria you have given to a factory are being taken into account and implemented properly.

The quality inspections are usually performed according to international quality control standards such as ANSI/ASQ   Z1.4-2003 (Equivalent to ISO 2589-1), but we also perform quality inspections as per your instructions and criteria and according to our expertise and long experience.

TOPWIN offers a complete range of quality inspection services in Asia and we can help you during all the steps of the production. Below is the list of our quality inspection services:

Before Production:

PPI

Pre Production Inspection

Product inspection of the golden samples, machinery and materials to be used for your order prior to the production and meeting with the vendor and the factory (identification of the key people) to make sure your requirements and specifications are well understood.

At the Beginning of Production:

IPI

Initial Production Inspection

Product inspection of the first products manufactured and materials to be used for your order when less than 20% of the products are ready, allowing to put in place corrective actions as early as possible.

During production:

DPI

During Production Inspection

Product inspection when 20 to 50% of the products are ready, allowing implementation of corrective actions when mass production is launched and before it is too late.

DSS

Defect Sorting Service

Focusing on inspecting as many products as possible and sorting out as many defective as possible.

PM

Production Monitoring

Constant oversight in your factory, control and recommendations for production processes and capacity, with daily reports on quality issues and production status, to assist you identify and direct the factory to fix the problems in real-time.

At the End of Production:

PSI

Pre-Shipment Inspection

Usually when at least 80% or 100% of the products are ready. A product inspection to guarantee the conformity of production to your specifications. A must for all buyers.

DSS

Defect Sorting Service

Focusing on inspecting as many products as possible and sorting out as many defective as possible.

CLS

Container Loading Supervision

The Container Loading Supervision will take place right before the vendor/manufacturer is supposed to load the goods inside the container and also during the loading process. This inspection usually takes place at the factory, it can also be performed in your forwarder’s premises.

Which Inspection Should I Choose?

Ideally, booking product inspections at all stages of the production will ensure maximum protection.

In order to save on costs, most buyers purchasing low to medium volumes will only choose to inspect at 2 or 3 steps of the production, and the most popular inspections are the During Production and the Pre shipment Inspection.

Note that we can help you determine what inspection service you shall put in place depending on your exact situation.

What Should I Do in the Case of a Failed Inspection?

You should study the product inspection report in detail and discuss results and future actions with your factory.

You should also consider our defect sorting service on a specific sampling size or on the full quantity.

OUR CREDENTIALS

Sign up and find your reliable quality inspection team.

    Copyright © TOPWIN | All Right Reserved | Designed by Nocti Solution</div>